Andrew Burks

Tag: Assemble

Vibratron Structure Construction Underway

by on Feb.09, 2011, under RobOrchestra, Robotics Club, Vibratron

Metal Cut

After a bit of confusion with OnlineMetals.com, I got all 94 feet of Aluminum 1”x1” in the mail.  I cut it up into the appropriate lengths using the cool new carbide-tipped miter saw in the robotics club.  In the end, there are 54 lengths of angle that all need holes drilled in specific places.  All these pictures are from my cell phone, so bear with me…

40 of the 54 lengths needed for the vibraphone:

Cut Angle

Key Units Painted

The first attempt at painting the key units was a complete failure.  However, Megan Dority suggested that I used primer, and even picked some up for me.  It worked like a charm.  Also, Austin Buchan was able to get the group access to the Newel Simon paint booth, which was a huge help.

Key units drying in the paint booth:

Key Units - Paint Booth

Key units after drying:

Key Units - Cart

Waterjet Parts Donated

RobOrchestra founder and alumnus Rich Pantaleo came through once again for the group.  He was able to obtain a large donated sheet of 6063 Aluminum in just a few days when we needed it most.  Also, he cut out all the parts we needed just a few days after getting the sheet!  I made a few mistakes on those parts, but nothing too critical.  I had to widen half of the slots in the giant half circles because I didn’t account for the thickness of the paint and the oversized hardboard.

Completely assembled and painted key unit:

Key Unit - Single on Circle

Key Unit - Single on Circle (below)

All of the key units on their half circles:

Key Units - On Circle - Top Iso (Prelim)

Key Units - On Circle - Front Close(Prelim)

Leave a Comment :, , , , , more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!